View P260XW01_4380488.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 1 / 29 www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 2 / 29 contents no contents record of revisions 1 general description 2 absolute maximum ratings 3 electrical specification 3-1 electriacl characteristics 3-2 interface connections 3-3 signal timing specification 3-4 signal timing waveform 3-5 color input data reference 3-6 power sequence 3-7 backlight specification 4 optical specification 5 mechanical characteristics 6 reliability test items 7 international standard 7-1 safety 7-2 emc 8 packing 8-1 definition of label 8-2 packing methods 8-3 pallet and shipment information 9 precaution 9-1 mounting precautions 9-2 operating precautions 9-3 electrostatic discharge control 9-4 precautions for strong light exposure 9-5 storage 9-6 handling precautions for protect film www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 3 / 29 record of revision version date page description 0.0 2010/06/04 first release 1.0 2010/06/23 4 add display orientation & note[1] 8 pin 2, 3 22 are modified into nc 2.0 2010/06/29 6 fill in the max. power supply input current & pow er consumption 3.0 2010/0729 4 pixel pitch correction 17 luminance variation correction:1.3=>1.33 23 vibration test condition modification: add: ?w ave form? 23 drop test condition modification: add referenc e standard 27 pallet dimension modification 4.0 2010/08/04 6 differential input high threshold voltage min value correction : -- => +100 6 differential input high threshold voltage max value correction :+100=> +300 6 differential input low threshold voltage min value correction : -100=> -300 6 differential input low threshold voltage max value correction : --=> -100 13 power sequence for lcd correction: delete edid read 13 power sequence for lcd correction: delete t2a t2b 13 power sequence for lcd note correction: delete t2b 13 power sequence parameter t2 max value corre ction : --=> 50 13 power sequence parameter t3 min value corre ction :200-=> 450 www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 4 / 29 1. general description this specification applies to the 26.0 inch color t ft-lcd module P260XW01 v0. this lcd module has a tf t active matrix type liquid crystal panel 1366x768 pi xels, and diagonal size of 26.0 inch. this module s upports 1366x768 mode. each pixel is divided into red, gree n and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pi xel color is determined with a 8-bit gray scale sig nal for each dot. the P260XW01 v0 has been designed to apply the 8-bi t 1 channel lvds interface method. it is intended t o support displays where high brightness, wide viewin g angle, high color saturation, and high color dept h are very important. * general information items specification unit note active screen size 26.00 inch display area 575.769 (h) x 323.712(v) mm outline dimension 626.0 (h) x 373.0 (v) x 52.0(d) m m with inverter driver element a-si tft active matrix display colors 8 bit, 16.7m colors number of pixels 1366 x 768 pixel pixel pitch 0.4215 (h) x 0.4215(w) mm pixel arrangement rgb vertical stripe display operation mode normally black surface treatment anti-glare, 3h haze=13% display orientation portrait/landscape enable [1] note [1]: the life is determined as the time at whi ch luminance of the lamp is 50% compared to that of initial value at the typical lamp current on condition of horizon tally continuous operating at 25 2 c. www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 5 / 29 2. absolute maximum ratings the followings are maximum values which, if exceede d, may cause faulty operation or damage to the unit item symbol min max unit conditions logic/lcd drive voltage vcc -0.3 14 [volt] note 1 input voltage of signal vin -0.3 4 [volt] note 1 operating temperature top 0 +50 [ o c] note 2 operating humidity hop 10 90 [%rh] note 2 storage temperature tst -20 +60 [ o c] note 2 storage humidity hst 10 90 [%rh] note 2 panel surface temperature pst 65 [ o c] note 3 note 1: duration:50 msec. note 2 : maximum wet-bulb should be 39 and no conde nsation. the relative humidity must not exceed 90% non-conde nsing at temperatures of 40 or less. at temperature s greater than 40 , the wet bulb temperature must not exceed 39 . note 3: surface temperature is measured at 50 dry condition www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 6 / 29 3. electrical specification the P260XW01 v0 requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. the second input for blu is to power inverter. 3.1 electrical characteristics value parameter symbol min. typ. max unit note lcd power supply input voltage (12v model) v dd 10.8 12 13.2 v dc 1 power supply input current (by product define) i dd 0.3 0.36 a 2 power consumption (by product define) p c 3.6 4.32 watt 2 inrush current (by product define) i rush 3.0 a 3 differential input high threshold voltage v th +100 -- +300 4 4 differential input low threshold voltage v tl -300 -- -100 4 4 lvds interface input common mode voltage v icm 1.1 1.25 1.4 v dc 4 input high threshold voltage v ih (high) 2.7 -- 3.3 v dc cmos interface input low threshold voltage v il (low) 0 -- 0.6 v dc backlight power consumption (refer to section: 3.7) p bl 38 40 42 watt life time 50000 -- hours 5 note : 1. the ripple voltage should be controlled under 10% o f v cc 2. test condition: (1) v dd = 12.0v (2) fv = 60hz (3) f clk = 86mhz (4) temperature = 25 (5) test pattern : white pattern 3. measurement condition : rising time = 400us www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 7 / 29 gnd gnd gnd gnd v vv v dd dddd dd 10% 90% 400 400400 400 s 4. v icm = 1.25v v vv v th thth th v vv v icm icm icm icm v vv v tl tltl tl 0 00 0v vv v 5. specified values are for a single lamp only which i s aligned horizontally. the lifetime is defined as the time which luminance of the lamp is 50% compared to its original value. [operating condition: continuous operating at ta = 252 ] www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 8 / 29 3.2 interface connections lcd connector: 196282-30041 (p-two, ffc connector) mating connector: pin symbol description 1 reserved auo internal use only 2 nc auo internal use only 3 nc auo internal use only 4 gnd ground 5 ch1_0- lvds channel 1, signal 0- 6 ch1_0+ lvds channel 1, signal 0+ 7 gnd ground 8 ch1_1- lvds channel 1, signal 1- 9 ch1_1+ lvds channel 1, signal 1+ 10 gnd ground 11 ch1_2- lvds channel 1, signal 2- 12 ch1_2+ lvds channel 1, signal 2+ 13 gnd ground 14 ch1_clk- lvds channel 1, clock - 15 ch1_clk+ lvds channel 1, clock + 16 gnd ground 17 ch1_3- lvds channel 1, signal 3- 18 ch1_3+ lvds channel 1, signal 3+ 19 gnd ground 20 panel_sel reserve 0603 footprint of resistor to gro und 21 lvds_sel open/high(3.3v) for ns, low(gnd) for jeida 22 nc auo internal use only 23 gnd ground 24 gnd ground 25 gnd ground 26 v dd power supply, +12v dc regulated 27 v dd power supply, +12v dc regulated 28 v dd power supply, +12v dc regulated 29 v dd power supply, +12v dc regulated 30 v dd power supply, +12v dc regulated www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 9 / 29 lvds option = high/open ns b bb b 2 22 2 n a n an a n a d e d ed e d e d e d ed e d e b bb b 2 22 2 b bb b 3 33 3 b bb b 4 44 4 b bb b 5 55 5 n a n an a n a b bb b 3 33 3 r rr r 0 00 0 r rr r 5 55 5 g gg g 0 00 0 g gg g 0 00 0 r rr r 0 00 0 r rr r 1 11 1 r rr r 2 22 2 r rr r 3 33 3 r rr r 4 44 4 r rr r 1 11 1 g gg g 1 11 1 b bb b 0 00 0 b bb b 1 11 1 b bb b 1 11 1 g gg g 1 11 1 g gg g 2 22 2 g gg g 3 33 3 g gg g 4 44 4 g gg g 5 55 5 g gg g 2 22 2 c lo ck c lo ck c lo ck c lo ck c h x c h x c h x c h x _ __ _ 0 00 0 + ++ + c h x c h x c h x c h x _ __ _ 0 00 0 - -- - c h x c h x c h x c h x _ __ _ 1 11 1 + ++ + c h x c h x c h x c h x _ __ _ 1 11 1 - -- - c h x c h x c h x c h x _ __ _ 2 22 2 + ++ + c h x c h x c h x c h x _ __ _ 2 22 2 - -- - c h x c h x c h x c h x _ __ _ 3 33 3 + ++ + c h x c h x c h x c h x _ __ _ 3 33 3 - -- - r rr r 6 66 6 b bb b 7 77 7 n a n an a n a n a n an a n a r rr r 6 66 6 r rr r 7 77 7 g gg g 6 66 6 g gg g 7 77 7 b bb b 6 66 6 r rr r 7 77 7 p re vio u s c y cle c u rre n t c yc le n e xt c yc le p re vio u s c y cle c u rre n t c yc le n e xt c yc le p re vio u s c y cle c u rre n t c yc le n e xt c yc le p re vio u s c y cle c u rre n t c yc le n e xt c yc le note: x = 1, 2, 3, 4? lvds option = low jeida b bb b 4 44 4 n a n an a n a d e d ed e d e d e d ed e d e b bb b 4 44 4 b bb b 5 55 5 b bb b 6 66 6 b bb b 7 77 7 n a n an a n a b bb b 5 55 5 r rr r 2 22 2 r rr r 7 77 7 g gg g 2 22 2 g gg g 2 22 2 r rr r 2 22 2 r rr r 3 33 3 r rr r 4 44 4 r rr r 5 55 5 r rr r 6 66 6 r rr r 3 33 3 g gg g 3 33 3 b bb b 2 22 2 b bb b 3 33 3 b bb b 3 33 3 g gg g 3 33 3 g gg g 4 44 4 g gg g 5 55 5 g gg g 6 66 6 g gg g 7 77 7 g gg g 4 44 4 c lo ck c lo ck c lo ck c lo ck r rr r 0 00 0 b bb b 1 11 1 n a n an a n a n a n an a n a r rr r 0 00 0 r rr r 1 11 1 g gg g 0 00 0 g gg g 1 11 1 b bb b 0 00 0 r rr r 1 11 1 c h x c h x c h x c h x _ __ _ 0 00 0 + ++ + c h x c h x c h x c h x _ __ _ 0 00 0 - -- - c h x c h x c h x c h x _ __ _ 1 11 1 + ++ + c h x c h x c h x c h x _ __ _ 1 11 1 - -- - c h x c h x c h x c h x _ __ _ 2 22 2 + ++ + c h x c h x c h x c h x _ __ _ 2 22 2 - -- - c h x c h x c h x c h x _ __ _ 3 33 3 + ++ + c h x c h x c h x c h x _ __ _ 3 33 3 - -- - p re vio u s c yc le c u rre n t c ycle n e x t c ycle p re vio u s c yc le c u rre n t c ycle n e x t c ycle p re vio u s c yc le c u rre n t c ycle n e x t c ycle p re vio u s c yc le c u rre n t c ycle n e x t c ycle note: x = 1, 2, 3, 4? g7 www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 10 / 29 3.3 signal timing specification this is the signal timing required at the input of the user connector. all of the interface signal tim ing should be satisfied with the following specifications for its proper operation. timing table signal item symbol min. typ. max unit vertical section period tv 784 810 1015 th active tdisp (v) 768 th blanking tblk (v) 16 42 247 th period th 1460 1648 2000 tclk active tdisp (h) 1366 tclk horizontal section blanking tblk (h) 94 282 634 tclk clock frequency fclk=1/tclk 50 80 86 mhz vertical frequency frequency fv 47 60 63 hz horizontal frequency frequency fh 43 48 53 khz notes: (1) display position is specific by the rise of de signal only. horizontal display position is specified by the ris ing edge of 1 st dclk after the rise of 1 st de, is displayed on the left edge of the screen. (2)vertical display position is specified by the ri se of de after a ?low? level period equivalent to e ight times of horizontal period. the 1 st data corresponding to one horizontal line after th e rise of 1 st de is displayed at the top line of screen. (3)if a period of de ?high? is less than 1366 dclk or less than 768 lines, the rest of the screen disp lays black. (4)the display position does not fit to the screen if a period of de ?high? and the effective data per iod do not synchronize with each other. www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 11 / 29 3.4 signal timing waveforms th tdisp(v) tblk(v) tv de rgb data line n invalid data invalid data line 1 line 2 line 3 line n line 4 tclk clk de ch1 pixel m-3 pixel m-2 pixel m-1 pixel m invalid data pixel 1 pixel 2 pixel 3 pixel 4 pixel 5 pixel 6 pixel m-2 pixel m-1 pixel m invalid data pixel 1 pixel 2 th tdisp(h) tblk(h) m m m m p p p p i i i i x x x x e e e e l l l l n l in e n l in e n l in e n l in e www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 12 / 29 3.5 color input data reference the brightness of each primary color (red, green an d blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color . the table below provides a reference for color ve rsus data input. color data reference input color data red msb lsb green msb lsb blue msb lsb color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ---- green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 g green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ---- blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 b blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 13 / 29 3.6 power sequence for lcd values parameter min. type. max. unit t1 0.4 --- 30 ms t2 0.1 --- 50 ms t3 450 --- --- ms t4 0 *1 --- --- ms t5 0 --- --- ms t6 --- --- --- *2 ms t7 500 --- --- ms note: (1) t4=0 : concern for residual pattern before blu turn off. (2) t6 : voltage of vdd must decay smoothly after p ower-off. (customer system decide this value) www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 14 / 29 3.7 backlight specification (inverter type) the backlight unit contains 3u type ccfls (cold ca thode fluorescent lamp) 3.7.1 electrical specification note 1 : dimming ratio= 100% (max) ta=255 , turn on for 45minutes note 2: measurement condition rising time = 20ms (v ddb : 10%~90%); note 3: less than10% dimming control is functional well and no backlight shutdown happened spec item symbol condition min typ max unit note 1 input voltage vddb - 21.6 24 26.4 vdc - 2 input current i ddb vddb=24 v 1.59 1.67 1.75 adc 1 3 input power p ddb vddb=24 v 38 40 42 w 1 4 inrush current i rush vddb=24 v - - 2.62 adc 2 on 2 - 5.5 - 5 on/off control voltage v blon off vddb=24 v 0 - 0.8 vdc - 6 on/off control current i blon vddb=24 v - - 1.5 ma - max 3.1 - 3.3 vdc - 7 dimming control voltage v_dim min vddb=24 v - 0 - vdc - 8 dimming control current i_dim vddb=24 v - - 2 madc - 9 internal dimming ratio dim_r vddb=24 v 20 - 100 % 3 max vddb=24 v 2 - 3.3 - 10 external pwm control voltage v_epw m min vddb=24 v 0 - 0.8 vdc - 11 external pwm control current i_epwm vddb=24 v - - 2 madc - 12 external pwm duty ratio d_epwm vddb=24 v 5 - 100 % 3 13 external pwm frequency f_epwm vddb=24 v 140 180 240 hz - www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 15 / 29 3.7.2 input pin assignment inverter connector: ci0114m1hrl-nh (cvilux) (note*) if external pwm function includes 10% dimmi ng ratio. judge condition as below: (1) backlight module must be lighted on normally. (2) all protection function must work normally. (3) uniformity and flicker could not be guaranteed pin no symbol description 1 vddb operating voltage supply, +24v dc regulated 2 vddb operating voltage supply, +24v dc regulated 3 vddb operating voltage supply, +24v dc regulated 4 vddb operating voltage supply, +24v dc regulated 5 vddb operating voltage supply, +24v dc regulated 6 blgnd ground and current return 7 blgnd ground and current return 8 blgnd ground and current return 9 blgnd ground and current return 10 blgnd ground and current return 11 det (27) blu status detection: normal : 0~0.8v ; abnormal : open collector 12 vblon bl on-off control: high/open (2.0v~5.5v) for bl on , low (gnd) for off 13 internal pwm (26) (vdi m) internal pwm (0~3.1v,20~100% duty) < nc ; when external pwm mode> (29) 14 external pwm (28) (pdi m) external pwm (5%~100% duty ratio) < nc ; when internal pwm mode> (29) www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 16 / 29 3.7.3 power sequence for inverter (refer to inv/ bb /lips) power input for blu (vddb) dimming control signal (vdim) blu on/off enable (vblon) 24v(typ.) 10% 90% 90% t1 t2 t3 t4 t5 power input for blu (vddb) dimming control signal (vdim) blu on/off enable (vblon) 24v(typ.) 10% 90% 90% t1 t2 t3 t4 t4 t5 dip condition for inverter power input for blu (vddb) t6 vddb(typ.)*0.8 power input for blu (vddb) t6 vddb(typ.)*0.8 value parameter min typ max units t1 20 - - ms t2 500 - - ms t3 200 - - ms t4 0 - - ms t5 1 - - ms t6 - - 10 ms www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 17 / 29 4. optical specification optical characteristics are determined after the un it has been ?on? and stable for approximately 45 mi nutes in a dark environment at 25c. the values specified are at an approximate distance 50cm from the lcd surfac e at a viewing angle of and equal to 0. fig.1 presents additional information concerning th e measurement equipment and method. values parameter symbol min. typ. max unit notes contrast ratio cr 2400 3000 -- 1 surface luminance (white) l wh 360 450 -- cd/m 2 2 luminance variation white(9p) -- -- 1.33 3 response time (g to g) t -- 6.5 -- ms 4 color gamut ntsc 72 % color coordinates red r x 0.640 r y 0.325 green g x 0.295 g y 0.602 blue b x 0.145 b y 0.057 white w x 0.280 w y typ.-0.03 0.290 typ.+0.03 viewing angle 5 x axis, right( =0) r -- 89 -- degree x axis, left( =180) l -- 89 -- degree y axis, up( =90) u -- 89 -- degree y axis, down ( =270) d -- 89 -- degree note: sr3 or equivalent www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 18 / 29 1. contrast ratio (cr) is defined mathematically as : surface luminance of l on5 contrast ratio= surface luminance of l off5 2. surface luminance is luminance value at point 5 across the lcd surface 50cm from the surface with a ll pixels displaying white. from more information see fig 2. when lamp current i h = 11ma. l wh =lon5 where lon5 is the luminance with all pixels displaying white at c enter 5 location. 3. the variation in surface luminance, white is defined (center of screen) as: white(9p) = maximum(l on1 , l on2 ,?,l on9 )/ minimum(l on1 , l on2 ,?l on9 ) 4. response time t is the average time required for display transition by switching the input signal for five luminance ratio (0%,25%,50%,75%,100% brightness mat rix) and is based on f v =60hz to optimize. target measured response time 0% 25% 50% 75% 100% 0% 0% to 25% 0% to 50% 0% to 75% 0% to 100% 25% 25% to 0% 25% to 50% 25% to 75% 25% to 100% 50% 50% to 0% 50% to 25% 50% to 75% 50% to 100% 75% 75% to 0% 75% to 25% 75% to 50% 75% to 100% start 100% 100% to 0% 100% to 25% 100% to 50% 100% to 75% 4. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determine d for the horizontal or x axis and the vertical or y axis wit h respect to the z axis which is normal to the lcd surface. for more information see fig4. fig. 2 luminance 1 2 3 4 5 6 7 8 h v h/6 h/2 v/2 v/6 www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 19 / 29 fig.4 viewing angle www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 20 / 29 5. mechanical characteristics the contents provide general mechanical characteris tics for the model P260XW01 v0. in addition the fig ures in the next page are detailed mechanical drawing of the lc d. horizontal 626.0 mm vertical 373 mm outline dimension depth 52 mm (to inverter cover) horizontal 580.8 mm bezel opening vertical 328.8 mm horizontal 575.769mm active display area vertical 323.712 mm weight 3500 g (typ.) surface treatment anti-glare, 3h www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 21 / 29 front view www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 22 / 29 back view www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 23 / 29 6. reliability test items test item q?ty condition 1 high temperature storage test 3 60 , 300hrs 2 low temperature storage test 3 -20 , 300hrs 3 high temperature operation test 3 50 , 300hrs 4 low temperature operation test 3 -5 , 300hrs 5 vibration test (non-operation) 3 wave form: random vibration level: 1.5g rms bandwidth: 10-300hz duration: x, y, z 30min one time each direction 6 shock test (non-operation) 3 shock level: 50g waveform: half since wave, 11ms direction: x, y, z, one time each direction 7 vibration test (with carton) 3 random wave (1.5g rms, 10-200hz) 30mins/ per each x,y,z axes 8 drop test (with carton) 3 height: 45.7m(astm d 4169) 1 corner, 3 edges, 6 flats (astm d 5276) www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 24 / 29 7. international standard 7.1 safety (1) ul 60950-1, ul 60065; standard for safety of in formation technology equipment including electrical business equipment. (2) iec 60950-1 : 2001, iec 60065:2001 ; standard f or safety of international electrotechnical commission (3) en 60950 : 2001+a11, en 60065:2002+a1:2006; eur opean committee for electrotechnical standardization (cenelec), european standard for sa fety of information technology equipment including electrical business equipment. 7.2 emc (1) ansi c63.4 ?methods of measurement of radio-noi se emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. ?american national standards institute(ansi), 1992 (2) c.i.s.p.r ?limits and methods of measurement of radio interface characteristics of information technology equipment.? international special commit tee on radio interference. (3) en 55022 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? european committee for elect rotechnical standardization. (cenelec), 1998 www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 25 / 29 8. packing 8-1 definition of label: a. panel label: *xxxxxxxxxxxx -xxxx * green mark description (1) for pb free product, auo will add for identification. (2) for rohs compatible products, auo will add rohs for identification. note: the green mark will be present only when the green documents have been ready by auo internal gre en team. (definition of green design follows the auo g reen design checklist.) b. carton label: P260XW01 vx 97.26pxx.xxx qty : 5 au optronics xxxxx made in xxxxx manufactured xx / xx xxxxxxx model no: P260XW01 v0 auo internal use week year panel unique id auo internal use factory location www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 26 / 29 8-2 packing methods: 1pcs module/esd bag 1pcs module/esd bag 1pcs module/esd bag 1pcs module/esd bag module 5 55 5 pc pcpc pc s / 1 carton s / 1 carton s / 1 carton s / 1 carton h tape cushion set cushion set cushion set cushion set www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 27 / 29 8-3 pallet and shipment information specification item qty. dimension weight (kg) packing remark 1 packing box 5pcs/box 722(l)*350(w)*438(h) 26 2 pallet 1 1060(l)*740(w)*132(h) 13 3 boxes per pallet 6 boxes/pallet 4 panels per pallet 30pcs/pallet pallet after packing 66 1060(l)*740(w)*1008(h) 175 stretch film label corner angle pet band moisture-proof film corner angle pallet www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 28 / 29 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1 mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to module. and the case on which a module is mounte d should have sufficient strength so that external force is not transmitted directly to the m odule. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter cause circuit broken by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth. (some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-h exane is recommended for cleaning the adhesives used to attach front/ rear polarizer. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2 operating precautions (1) the device listed in the product specification sheets was designed and manufactured for tv application (2) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage: v=200mv(over and under shoot voltage) (3) response time depends on the temperature. (in l ower temperature, it becomes longer..) (4) brightness of ccfl depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time (required time tha t brightness is stable after turned on) becomes longer. (5) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (6) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (7) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll www..net www..net
P260XW01 v0 product specification rev. 30 ? copyright auo optronics corp. 2009 all rights res erved. page 29 / 29 be done by system manufacturers. grounding and shie lding methods may be important to minimize the interface. 9-3 electrostatic discharge control since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground thro ugh wristband etc. and don?t touch interface pin directly. 9-4 precautions for strong light exposure strong light exposure causes degradation of polariz er and color filter. 9-5 storage when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 and 35 at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that the y be stored in the container in which they were shipp ed. 9-6 handling precautions for protection film (1) the protection film is attached to the bezel wi th a small masking tape. when the protection film i s peeled off, static electricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue r emains on the bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. www..net www..net

▲Up To Search▲

Price & Availability of P260XW01

	To Download P260XW01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .